Skoolie Parts for School Bus Conversions
We make replacement body panels and rust repair parts for school buses, for bus garages, school district fleets and skoolie conversions alike.
This page lists the skoolie parts our conversion guides cover, by the area of the bus body where the rust is, with the guide for each. It is all body steel: the body and the rust are what we make parts for.
Lower side panels
The lower side panels run from the bottom of the windows down to the floor line, and they are the biggest single stretch of body steel on the bus. Salt spray, gravel and standing water all live down there. The rub rail hides the top edge of the lower panel and a lot of the rust, so take it off before you decide anything.
Parts
Guides
Wheel wells
Rust nearly always starts at the outer lip of the wheel well and works inward toward the floor. By the time you can see it from outside, the inner fender behind it is usually further gone, and most builders do both at once.
Parts
Guides
Dog houses and the firewall
Dog houses are the engine covers, and they are usually the first place rust shows up. Inspect the cover, flange, seals and mounting points, then compare the exact part before deciding between a repair kit and a replacement.
Parts
Guides
Step wells
The step well sits low and catches salt, water and grit. If you are converting and the step well is rough, do it now: doing it later, after the build is in, is miserable. Step wells vary by manufacturer, model, year and body configuration, so send the bus details, dimensions and photos to confirm the fit before ordering.
Parts
Guides
Floor cross members
A bus floor sits on steel channels called cross members, hidden under the plywood. Get the steel right first: once a subfloor, insulation and finished floor are laid over rotted cross members, fixing it means tearing the whole build back out.
Parts
Guides
Battery boxes and fuel tank straps
The battery box spends its whole life venting acid at its own sheet metal, so it is usually one of the first body parts to rot through, and the wall right behind it is often just as bad. The fuel tank area tells the same kind of story: salt and mud collect on the straps and the floor above the tank.
Parts
Guides
Doors
A door that will not seal lets water into the step well and the floor, and that is where the rust starts. Open and shut all of them, the entrance door and the rear emergency door included, and watch for sag, sticking and gaps.
Parts
Guides
How to order skoolie parts
The part number is usually stamped or stickered on the back of the original panel, so check there first. If you can read it, look it up in the catalog and order the match.
If the number rusted off, measure the panel and send photos from three angles with the year, make and model of the bus. We will match it to a stock panel or bend one to suit, and we ship from Ohio.
You can browse the whole catalog without an account, but prices are shown to account holders only. Add parts to your cart and send them as a quote request and we will follow up with pricing and freight.
Contact us about a conversion
Call 888-402-1661 (sales) or 330-863-3053 (shop), email doug@custombusandtruck.com, or visit us at 302 S. Market St, Minerva, OH 44657. Monday - Friday: 7:00 AM - 4:00 PM EST.